Composite Geogrids are used for stabilize soils where a both reinforcing and separation between a granular base and very fine soil is required. The geocomposite binds closely to the soil being reinforced, separates different soil types and provides an effective filter action.
Fiberglass Geogrid combines With Nonwoven Geotextile Impregnated By Bitumen is an Asphalt Reinforcement Composite that fiberglass geogrid with light weight Polyester Spunbond Nonwoven Fabric .
They are stitcked together and coated by bitumen to strengthen the bond with the asphalt layers . The asphalt layer to increase the tensile strength to prevent road surface crack caused by foundation crack reflection.
The chemistry stability is good, the hot-stability is good, anti-weary dehiscence, anti-low temperature shrinkage crack, postponement reduction reflection crack.
It can widely apply in the water conservation, the municipal administration, the building, the transportation, the subway, the tunnel, the environmental protection and so on.
While reflective cracks are observed at the road’s surface, they are generally not caused by traffic. Over time, asphalt roads can be exposed to subsidence or bending, and the cracks eventually make their way to the surface. Once the cracks are exposed they allow water into the pavement. Moisture in the subgrade weakens the pavement structure and causes spalling (separation and loss of material) at the crack, bums, and wear. Left untreated, the road will eventually deteriorate.
To avoid the formation of reflective cracks, contractors place geocomposites, such as grid-reinforced bituminous membranes, during paving in between coating layers. These products provide both reinforcement and crack prevention.
Property | Test Method | 50-50 | 100-100 | 120-120 | |
Unit Weight | g/m2 | 270±10 | 500±20 | 550±20 | |
Ultimate tensile strength (kN/m) | MD |
ASTM D-5261
| 50 | 100 | 120 |
CD | 50 | 100 | 120 | ||
Elongation at Break (%) | MD | 3 | |||
CD | 3 | ||||
Approximate mesh size(mm) | mm | Measured | 12.7×12.7 25.4×25.4 40×40 | ||
Open Area of Grid | % | CWO 22125 | >80 | ||
Shrinkage @375° F for 15min | % | <1 | |||
Melting Point | ℃ | ASTM D-276 | 255 | ||
Spunbond Nonwoven Fabric | g | 30/40 | |||
Roll Dimension | m | 2x100m,2.5x100m,3.95x100m,5x100m | |||
TANRU has been specializing in delivering One-Stop geosynthetics products and solutions to worldwide customers since its foundation in 2013. TANRU had provided many types of effective and state of the Nice Geomembranes, Geotextiles, Geocells, Geosynthetic Clay Liners (GCLs), Geogrids to over 61 countries. Our main customers are from Australia, France, Sweden, UK, Hong Kong, Hungary, New Zealand, Poland, Mexico, Ecuador, Brazil, Pakistan, Bangladesh, Thailand, Vietnam, Malaysia, Indonesia, Singapore, Philippines, Sri Lanka, India, UAE, Saudi Arabia, Qatar, Kenya, Ghana, Ethiopia, Somalia, Nigeria, South Africa, Swaziland, Mongolia, etc.